Bodily Contact
Safety Campaign
A hands-on bodily contact safety campaign at five data centre sites across Singapore, Taiwan, Malaysia and Thailand in September 2026. Hazards that hurt in a second are easy to overlook in a routine, so we made them hard to ignore. Across 14 to 29 September 2026, 230 participants worked through hands-on booths, with a fifth booth added in Thailand and Malaysia. Teams learned to spot bodily contact hazards, understand how the injuries happen, and apply the controls that prevent them: guarding, energy isolation and Stop Work Authority.
Programme Overview
Booth 1, Every Contact Counts: common bodily contact hazards from the client’s own safety standards, how injuries occur, and the factors that cause a hazard to be overlooked. A hands-on cone and ring activity makes the point that familiar routes are the easiest to overlook
Booth 2, Don’t Get Caught In The Spot: the controls that prevent contact incidents, equipment guarding, energy isolation (lock, tag, verify) and pedestrian-vehicle safety
Booth 3, Above & Around: The Gravity Check: struck-by and falling object hazards, with a quick-reaction online game on common contact zones and key risk factors
Booth 4, Mind The Edge: hand and power tool safety, covering entanglement, nip points and flying debris, with a hands-on comparison of the cut-resistant gloves used across the client’s data centres
Booth 5, Energy Wheel & Stop Work Authority (Thailand and Malaysia only): tracing everyday hazards back to their energy source, and practising when and how to stop work
Campaign in Action
Real sessions from the campaign, showing what participants actually did on the day.
Booth 2, Don’t Get Caught In The Spot. Participants covered the two zones that need guarding, the point of operation and the power transmission parts, and the difference between fixed and interlocked guards. They learned why switching a machine off only removes one type of energy, how lock, tag and verify isolation works, and why a forklift’s rear swings wider than its front, so “clear of the front” never means clear of the vehicle.
Booth 3, Above & Around: The Gravity Check. Built around real incidents, this booth had participants map the common contact zones around them and the risk factors that turn a dropped or swinging object into an injury. A quick-reaction online game put it under pressure, with safety questions paying out coins for correct answers, and the booth closed on practical ways to protect yourself from what is above and around you.
Booth 4, Mind The Edge. Participants learned to recognise entanglement, nip points and flying debris before picking a tool up, and why equipment checks and machine guarding come first. The gloves used across the client’s data centres were laid out side by side, so participants could compare what each one protects against, and where each one stops.
Booth 5, Energy Wheel & Stop Work Authority (Thailand and Malaysia only). Participants used the Energy Wheel’s ten energy types, from gravity and motion to electrical, pressure and chemical, to trace everyday hazards back to the energy behind them, and saw how losing control of that energy leads to harm. They then learned when to exercise Stop Work Authority and practised its four steps: Stop, Notify, Correct and Resume.
Campaign Impact
230
Participants
5
Sites
5
Activity Booths
"Thank you for your campaign. It will make me work safer."
Participant, Data Centre, Thailand
Related Programmes
Road Safety
This Road Safety Campaign focused on raising awareness of road hazards through engaging and hands-on learning …
Electrical Safety
This Electrical Safety Campaign focused on raising awareness of workplace electrical hazards through engaging …
Unlocking Knee Pain
This campaign emphasises knee health by educating participants on different types of knee guards, appropriate …
Customise This For
Your Team?
Every workplace has its own risks. We build campaigns around your operations, your people and your site.